QUICK - STRONG - SAFE
ERGOFLEXINC.
180 S. Western Avenue # 190
Carpentersville, Illinois 60110
Phone: (847) 836-9800
Fax: (847) 836-9370
Email:
info@ergoflex.com
| Rotating angle around the
pillar: (theta axis) |
360° optional continuous rotation |
| Angle of rotation of the
tool attachment about the alpha axis: (Limited to 360° if the arm is equipped with a pneumatic or hydraulic lifting tool) |
Unlimited |
| Maximum lifting speed: (Higher speeds are also possible, if necessary) |
See Table below |
| Compressed air supply: (Only for MA60 and MA80 or for other units with pneumatic balancing system) |
Min. 80 p.s.i. Max. 140 p.s.i. |
| Power Supply: (Available for other supplies to special order) |
Three-Phase 230/460 V, 60 Hz |
| Accuracy within the specified working range: | + 5 % |
The specifications are subject to change without prior notice.
STANDARD SIZES FOR MA SERIES
|
Type |
Max. load lbs. |
Max. off-center load
|
R |
X |
Z |
T |
L |
H |
E |
F*) |
J |
K |
P |
Max. lifting speed inches/sec. |
|
MA60 |
130 |
144 |
106.5 |
85.4 |
74.8 |
4.5 |
83 |
172 |
67.3 |
23 |
-- |
-- |
19.8 |
12 |
|
MA80 |
175 |
180 |
86.4 |
69.3 |
59.0 |
9.6 |
69 |
148 |
67.3 |
23 |
-- |
-- |
19.8 |
10 |
|
MA75 |
165 |
216 |
118.3 |
95.1 |
84.6 |
1.0 |
90 |
186 |
67.3 |
34 |
63 |
1.6 |
19.8 |
11 |
|
MA75E |
165 |
216 |
137.4 |
95.1 |
84.6 |
1.4 |
77 |
186 |
95.7 |
23 |
63 |
12.6 |
33.9 |
11 |
|
MA75SE |
165 |
216 |
157.1 |
95.1 |
84.6 |
1.6 |
108 |
186 |
32.9 |
23 |
44 |
18.9 |
3.5 |
11 |
|
MA110 |
240 |
360 |
86.4 |
69.3 |
59.0 |
9.6 |
69 |
148 |
67.3 |
34 |
63 |
1.6 |
19.8 |
10 |
|
MA110E |
240 |
360 |
105.5 |
69.3 |
59.0 |
12.0 |
57 |
150 |
95.7 |
23 |
63 |
12.6 |
33.9 |
10 |
|
MA110SE |
240 |
360 |
125.2 |
69.3 |
59.0 |
6.3 |
83 |
145 |
32.9 |
23 |
44 |
18.9 |
3.5 |
10 |
|
MA150 |
330 |
580 |
118.3 |
95.1 |
84.6 |
1.0 |
90 |
186 |
67.3 |
34 |
63 |
1.6 |
19.8 |
11 |
|
MA150E |
330 |
580 |
137.4 |
95.1 |
84.6 |
1.6 |
77 |
186 |
96.0 |
23 |
63 |
12.6 |
34.0 |
11 |
|
MA150SE |
330 |
580 |
157.1 |
95.1 |
84.6 |
1.8 |
108 |
186 |
33.6 |
23 |
44 |
18.9 |
3.3 |
11 |
|
MA200 |
440 |
580 |
93.7 |
75.4 |
65.0 |
2.8 |
69 |
152 |
67.3 |
34 |
63 |
1.6 |
19.8 |
10 |
|
MA200E |
440 |
580 |
112.8 |
75.4 |
65.0 |
5.3 |
57 |
154 |
96.0 |
23 |
63 |
12.6 |
34.0 |
10 |
|
MA200SE |
440 |
580 |
132.5 |
75.4 |
65.0 |
7.5 |
90 |
156 |
33.6 |
23 |
44 |
18.9 |
3.3 |
10 |
|
MA260 |
575 |
580 |
74.0 |
59.0 |
49.2 |
9.6 |
57 |
130 |
67.3 |
34 |
63 |
1.6 |
19.8 |
8 |
|
MA260E |
575 |
580 |
93.1 |
59.0 |
49.2 |
10.2 |
43 |
130 |
96.0 |
23 |
63 |
12.6 |
34.0 |
8 |
|
MA260SE |
575 |
580 |
112.8 |
59.0 |
49.2 |
4.5 |
69 |
124 |
33.6 |
23 |
44 |
18.9 |
3.3 |
8 |
Dimensions in inches. *) Refers to necessary space.
STANDARD SIZES FOR MB SERIES
|
Type |
Max load lbs |
R |
r |
z |
|
MB60 |
130 |
110.2 |
19.7 |
63.0 |
|
MB90 |
200 |
110.2 |
19.7 |
63.0 |
|
MB150 |
330 |
110.2 |
19.7 |
63.0 |
|
MB240 |
525 |
110.2 |
19.7 |
63.0 |
|
MBSpec. |
Max 1500 |
Max 180 |
Min 0 |
Max 115 |
CLICK HERE FOR TECHNICAL SPECIFICATIONS IN METRIC