QUICK - STRONG - SAFE

ERGOFLEXINC.
180 S. Western Avenue # 190
Carpentersville, Illinois 60110
Phone: (847) 836-9800
Fax: (847) 836-9370
Email: info@ergoflex.com

Slewing angle around the pillar: (theta axis)	360°
Angle of rotation of the tool attachment about the alpha axis: (Limited to 360° if the arm is equipped with a pneumatic or hydraulic lifting tool)	Unlimited
Maximum lifting speed: (Higher speeds are also possible, if necessary)	See Table below
Compressed air supply: (Only for MA60 and MA80 or for other units with pneumatic balancing system)	Min. .056 MPa Max. 1.0 MPa
Power Supply: (Available for other supplies to special order)	Three-Phase 415 V, 50 Hz
Accuracy within the specified working range:	+ 5 %

The specifications are subject to change without prior notice.

STANDARD SIZES FOR MA SERIES

Type	Max load kg	Max off-center load, Nm	R	X	Z	T	L	H	E	*F)**	J	K	P	Max lifting speed m/min
MA60	60	200	2705	2170	1900	115	2100	4360	1710	585	-	-	500	18
MA80	80	250	2195	1760	1500	245	1750	3750	1710	585	-	-	500	15
MA75	75	300	3005	2415	2150	25	2300	4710	1710	850	1600	40	500	18
MA75E	75	300	3490	2415	2150	35	1950	4725	2430	585	1600	320	860	18
MA75SE	75	300	3990	2415	2150	40	2750	4730	835	585	1120	480	90	18
MA110	110	500	2195	1760	1500	245	1750	3750	1710	850	1600	40	500	15
MA110E	110	500	2680	1760	1500	305	1450	3815	2430	585	1600	320	860	15
MA110SE	110	500	3180	1760	1500	160	2100	3670	835	585	1120	480	90	15
MA150	150	800	3005	2415	2150	25	2300	4720	1710	850	1600	40	500	18
MA150E	150	800	3490	2415	2150	40	1950	4735	2440	585	1600	320	865	18
MA150SE	150	800	3990	2415	2150	45	2750	4740	845	585	1120	480	85	18
MA200	200	800	2380	1915	1650	70	1750	3840	1710	850	1600	40	500	14
MA200E	200	800	2865	1915	1650	135	1450	39005	2440	585	1600	320	865	14
MA200SE	200	800	3365	1915	1650	190	2300	3960	845	585	1120	480	85	14
MA260	260	800	1880	1500	1250	245	1450	3280	1710	850	1600	40	500	10
MA260E	260	800	2365	1500	1250	260	1100	3295	2440	585	1600	320	865	10
MA260SE	260	800	2865	1500	1250	115	1750	3150	845	585	1120	480	85	10

Dimensions in millimeters. *) Refers to necessary space.

STANDARD SIZES FOR MB SERIES

Type	Max Load kg	R	r	z
MB60	60	2800	500	1600
MB90	90	2800	500	1600
MB150	150	2800	500	1600
MB240	240	2800	500	1600